Specifications

JFX220-2515
Print head		On-demand Piezo head (4 staggered layout)
Print resolution		Y: 300, 600, 1,200 dpi　X: 300, 450, 600, 900, 1,200 dpi
Ink	Type/Color	Hard UV curable ink: ELH-100 (C, M, Y, K, Lc, Lm, W, Cl) Flexible UV curable ink: ELS-120 (C, M, Y, K, Lc, Lm, W, Cl) Fluorescent UV curable ink: EFS-150 (Fp, Fy) *1 Primer: PR-200 *2
	Capacity	1L bottle (ELH-100, ELS-120, EFS-150, PR-200) 250ml bottle (ELH-100, ELS-120, PR-200)
Maximum printable area (W × D)		2,500 x 1,500 mm (98.4 x 59.1")
Media	Adsorption size	Max. 2,500 x 1,930 mm (98.4 x 76.0")
	Thickness	Max. 101.6 mm (4.0")
	Weight	Less than 50 kg/m², non concentrated load
Absorption area partitions		25 mm (1") pitch suction holes
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, RCM, KC, UKCA
Interface		Ethernet 1000BASE-T
Power specification		Single phase AC200-240V±10% 12A or less, Single phase AC200-240V±10% 10A or less
Power consumption		INLET1: 2.88 kVA or less, INLET2: 2.33 kVA or less
Operational environment		Temperature: 15–30 °C (59–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Temperature gradient: Less than ± 10 °C/h (± 50 °F/h) Dust level: Similar to standard office environments
Dimensions (W × D × H)		4,400 x 2,520 x 1,490 mm (173.2 x 99.2 x 58.7")
Weight		920 kg (2,028.3 lb)

*1: Use in combination with ELH-100 or ELS-120.
*2: Use in combination with UV curable inks.

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---