3DUJ-553

Specifications

3DUJ-553
Modeling method UV curable inkjet
Available color number Full color
More than 10 million different colors
Print head On-demand piezoelectric print head (8 head inline)
InkType/Color Modeling ink: MH-100 (C, M, Y, K, White, Clear)
Modeling ink: MH-110 (Pure Clear)
Support material ink: SW-100
Tank volume C, M, Y, K: 3L
White, Clear, Pure Clear, Support material: 5L
Supply style C, M, Y, K: 1L bottle
White, Clear, Pure Clear, Support material: 4.8L bottle
Available modeling area
(W × D × H)
508 × 508 × 305 mm (20 × 20 × 12 in) *1
Load capacity
(Weight of modeled object)
70 kg (154.3 lb) or less *1
Minimum layer pitch 20 μm
3D data format STL, OBJ, VRML, PLY, 3MF
Software
(Standard accessories)
Layout software [Mimaki 3D Link]
Interface Ethernet 1000BASE-TX
Power supply Single phase AC 100-120V/220-240V±10%, 50/60Hz±1Hz x3
Power
consumption
Printer 1300 W or less
External PC 300 W or less
Touch panel 30 W or less
Safety standard VCCI Class A / FCC Class A / Compliant with UL60950, ETL /
CE Marking (EMC, Low Voltage Directive) /
CB Report / RoHS / REACH
Installation environmentTemperature 15 – 35 °C (59 – 95 °F)
Relative humidity 35 – 60 %Rh (Non condensing)
Recomended Temperature 20 – 25 °C (68 – 77 °F)
Dust Places without mine dust (Dust amount 0.15mg/m³ or less) *2
Dimensions (W × D × H) 2,250 × 1,500 × 1,550 mm (88.6 × 59.1 × 61.0 in)
Weight 600kg (1322.8 lb)

*1: including support materials
*2: 0.15mg/m³ or less...The numerical value of the dust quantity equivalent to the office specified by the Building Standards Act of Japan.

  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • When installation and operation training etc. of products are demanded on purchasing, an extra cost would be necessary except the products cost.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.


3D modeling workflow


3D modeling workflow

Precautions for 3D modeling


Precautions for 3D objects

  • Please make sure to execute an advanced evaluation regarding the physical property (strength, weather resistance, safety etc.) for estimated applications. 
  • Depending on application, a post-processing might be necessary such as top coating or wiping by ethanol.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Please make sure the room is well ventilated due to smells partially accompanying with 3D modeling.
  • Please use the attached goggles and globes when taking out an object or taking off support materials after modeling.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

3DUJ-553 Catalog (4.48MB)pdf file

Model

3DUJ-553 Available modeling area: 508 x 508 x 305 mm (20 x 20 x 12")
RRP (Ex GST) AU$ 219,995

Related products

Return to Content

PAGETOP